Hummer 2010 H3 User Manual download pdf (Page 346)

10-80 Vehicle Care

7. Remove all the wheel nuts and

take off the flat tire.

{

WARNING

Rust or dirt on a wheel, or on the

parts to which it is fastened, can

make wheel nuts become loose

after time. The wheel could come

off and cause an accident. When

changing a wheel, remove any

rust or dirt from places where the

wheel attaches to the vehicle. In

an emergency, use a cloth or a

paper towel to do this; but be sure

to use a scraper or wire brush

later, if needed, to get all the rust

or dirt off. See If a Tire Goes Flat

on page 10‑64

.

8. Remove any rust or dirt from the

wheel bolts, mounting surfaces

and spare wheel.

{

WARNING

Never use oil or grease on bolts

or nuts because the nuts might

come loose. The vehicle's wheel

could fall off, causing a crash.

9. Put the spare tire on the

mounting surface.

10. Put the wheel nuts back on

with the rounded end of the

nuts toward the wheel after

mounting the spare.

11. Tighten each wheel nut by

hand. Then use the wheel

wrench to tighten the nuts until

the wheel is held against

the hub.

12. Turn the wheel wrench

counterclockwise to lower

the vehicle. Lower the jack

completely.

1 2 ... 341 342 343 344 345 346 347 348 349 350 351 ... 409 410

Comments to this Manuals

No comments