Hummer 2010 H3 User Manual download pdf (Page 105)

Seats and Restraints 3-61

6. To tighten the belt, push down

on the child restraint, pull the

shoulder portion of the belt to

tighten the lap portion of the belt

and feed the shoulder belt back

into the retractor. When installing

a forward-facing child restraint,

it may be helpful to use your

knee to push down on the child

restraint as you tighten the belt.

7. If the child restraint has a top

tether, follow the child restraint

manufacturer's instructions

regarding the use of the top

tether. See Lower Anchors and

Tethers for Children (LATCH

System)

on page 3‑51

for more

information.

For H3T models, if the headrest

interferes with the installation of

the child restraint, remove the

headrest by pressing the button

on the headrest post, at the

top of the seatback, and lift to

remove. Store the headrest

under the outboard side of the

rear seat.

8. Push and pull the child restraint

in different directions to be sure

it is secure.

To remove the child restraint,

unbuckle the vehicle safety belt and

let it return to the stowed position.

If the top tether is attached to a top

tether anchor, disconnect it. If the

headrest has been removed,

reinsert it onto the seatback.

Securing Child Restraints

(Rear Center Seating

Position)

Many child restraints are too wide to

be correctly secured in the center

rear seat, although some of them

will fit there. If the center seat

position is too narrow for the child

restraint, secure it in a rear outside

seat position.

If a child restraint is secured in the

center seat position, follow the

instructions in Securing Child

Restraints (Rear Outboard Seating

Position)

on page 3‑59

or Securing

Child Restraints (Rear Center

Seating Position)

on page 3‑61

or

Securing Child Restraints (Right

Front Seat Position) on page 3‑62.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 409 410

Comments to this Manuals

No comments