Hummer 2004 H2 User Manual download pdf (Page 115)

Temperature Display

The temperature can be displayed by pressing the

TEMP button. Press the TEMP button once brieﬂy to

toggle the temperature reading on and off. To alternate

the temperature reading between Fahrenheit and

Celsius, press and hold the TEMP button for

approximately four seconds until the display blinks °F

and °C. Press and release the TEMP button to

toggle between the Fahrenheit and Celsius readings.

After about four seconds of inactivity, the display

will stop blinking and display the last selection made.

Press and release the TEMP button to toggle the

temperature display between Fahrenheit or Celsius.

If an abnormal temperature reading is displayed for an

extended period of time (30 minutes), see your

dealer. Under certain circumstances, a delay in updating

the temperature is normal.

Automatic Dimming Mirror Operation

Press and hold the TEMP button for about eight seconds

to turn the automatic dimming feature on or off. The

indicator light to the right of the TEMP button will turn on

or off to show you when the automatic dimming

feature is activated. Once the mirror is turned off, it will

remain off until it is turned back on, or until the

vehicle is restarted.

Compass Operation

Press the COMP button once brieﬂy to turn the compass

on or off.

When the ignition and the compass feature are on, the

compass will show two character boxes for about

two seconds. After two seconds, the mirror will display

the compass heading.

Compass Calibration

The compass may need calibration if one of the

following occurs:

• If CAL is displayed while driving in the vehicle.

• After about ﬁve seconds, the display does not show

a compass heading (N for North, for example),

there may be a strong magnetic ﬁeld interfering with

the compass. Such interference may be caused

by a magnetic antenna mount, magnetic note pad

holder or a similar magnetic item.

• The compass does not display the correct heading

and the compass zone variance is set correctly.

In order to calibrate, CAL must be displayed in the

mirror compass windows. If CAL is not displayed, push

in the COMP button for about eight seconds or until

CAL is displayed.

2-35

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 471 472

Comments to this Manuals

No comments

Hummer 2004 H2 User Manual Page 115

Comments to this Manuals